51405A
1.REMOVE NO. 1 ENGINE UNDER COVER
2.DRAIN ENGINE COOLANT
3.DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
58410
4.REMOVE ENGINE SERVICE HOLE COVER
58734B
5.REMOVE REAR ENGINE SERVICE COVER WEATHERSTRIP
58521D
6.REMOVE ENGINE SERVICE HOLE COVER MAT
58420
7.REMOVE NO. 2 ENGINE SERVICE HOLE COVER ASSEMBLY
58123A
8.REMOVE SHIFT AND SELECT LEVER SUPPORT WITH BOOTS
33506F
9.REMOVE FLOOR SHIFT CONTROL SHIFT LEVER RETAINER SUB-ASSEMBLY
58701A
10.REMOVE FRONT ENGINE SERVICE COVER PANEL SUB-ASSEMBLY
16371
11.LOOSEN FAN PULLEY
88310A
12.REMOVE NO. 1 V (COOLER COMPRESSOR TO CRANKSHAFT PULLEY) BELT
16361A
13.REMOVE FAN AND GENERATOR V BELT
16361
14.REMOVE FAN
16371
15.REMOVE FAN PULLEY
16571
16.DISCONNECT RADIATOR HOSE INLET
Loosen the clip and disconnect the radiator hose inlet.
16520
17.SEPARATE WATER FILLER ASSEMBLY
Remove the radiator cap.
Disconnect the radiator reserve tank hose.
Remove the 2 bolts and separate the water filler assembly.
16572D
18.DISCONNECT NO. 2 RADIATOR HOSE
Loosen the clip and No. 2 radiator hose.
53168
19.REMOVE RADIATOR BRACE ROD LH
Remove the bolt and nut and remove the radiator brace rod LH.
53167
20.REMOVE RADIATOR BRACE ROD RH
Remove the bolt and nut and remove the radiator brace rod RH.
16701
21.REMOVE FAN SHROUD SUB-ASSEMBLY
Separate the reserve tank hose from the fan shroud.
Remove the 4 bolts from the fan shroud sub-assembly.
16400
22.REMOVE RADIATOR ASSEMBLY
Remove the bolt and nut, then remove the radiator.
16582
23.REMOVE NO. 1 RADIATOR BRACKET
Remove the 4 bolts and 2 No. 1 radiator brackets.
16520
24.REMOVE WATER FILLER ASSEMBLY
Loosen the clip and remove the water filler assembly.
16571
25.REMOVE RADIATOR HOSE INLET
Loosen the clip and remove the radiator hose inlet.