Home › Engine / Hybrid System › N04C-WA (FUEL) › FUEL ADDITION CUT VALVE ASSEMBLY › from 2019.08
RM2850E _51 Engine / Hybrid System _082613 N04C-WA FUEL _0400951 FUEL ADDITION CUT VALVE ASSEMBLY A

N04C-WA FUEL  FUEL ADDITION CUT VALVE ASSEMBLY  INSTALLATION  


PROCEDURE

Hide 22214B 1.INSTALL FUEL ADDITION CUT VALVE ASSEMBLY

a.

Install the fuel addition cut valve assembly with the 2 bolts.

Torque:
28.5 N*m (291 kgf*cm, 21 ft.*lbf)


b.

Connect the fuel addition cut valve assembly connector.


Hide 23801L 2.INSTALL FUEL FILTER TO INJECTION PUMP FUEL PIPE SUB-ASSEMBLY

a.
A450693

Install a new gasket and the fuel filter to injection pump fuel pipe sub-assembly with the union bolt.

Torque:
24.5 N*m (250 kgf*cm, 18 ft.*lbf)

NOTICE:

Be sure to prevent foreign matter or water from entering the lines.



b.

Install the fuel pipe clamp with the nut.

HINT:

Tighten the nut until the clamp edge makes contact with the engine side clamp edge.



c.
A450692C02
2.24,1.927 2.531,2.146 0.292,0.219 10 true *a 0.979,0.25 1.26,0.469 0.281,0.219 10 true *b
*a Union Bolt A
*b Union Bolt B


Install 2 new gaskets and the fuel filter to injection pump fuel pipe sub-assembly to the fuel addition cut valve assembly with the 2 union bolts.

Torque:
Union Bolt A : 19.6 N*m (200 kgf*cm, 14 ft.*lbf)
Union Bolt B : 24.5 N*m (250 kgf*cm, 18 ft.*lbf)

NOTICE:

Be sure to prevent foreign matter or water from entering the lines.



Hide 23802E 3.INSTALL FUEL PIPE SUB-ASSEMBLY

a.
A450691

Install new 2 gaskets and the fuel pipe sub-assembly with the 2 union bolts.

Torque:
19.6 N*m (200 kgf*cm, 14 ft.*lbf)

NOTICE:

Be sure to prevent foreign matter or water from entering the lines.



Hide 23083 4.INSTALL NO. 3 NOZZLE LEAKAGE PIPE SUB-ASSEMBLY

Hide 58734B 8.INSTALL REAR ENGINE SERVICE COVER WEATHERSTRIP

Hide 58410 9.INSTALL ENGINE SERVICE HOLE COVER