Use the same procedure for LHD and RHD vehicles.
The procedure listed below is for the RHD vehicles.
87120
1.INSTALL REAR HEATER ASSEMBLY
for Front Side:
Install the rear heater assembly with the 3 bolts.
for Rear Side:
Install the rear heater assembly with the 2 bolts and nut.
87209
2.CONNECT WATER HOSE SUB-ASSEMBLY (for Front Side, RHD)
| *a | View A |
| *b | Front of Vehicle |
| *c | Rear of Vehicle |
| *d | Right of Vehicle |
| *e | Left of Vehicle |
| *f | Clamp |
| *g | Connector |
| *h | Bolt |
Type A:
Connect the 2 water hose sub-assemblies with the 2 clamps as shown in the illustration.
Connect the connector.
Attach the guide.
Install the bolt.
| *a | View A |
| *b | Front of Vehicle |
| *c | Rear of Vehicle |
| *d | Right of Vehicle |
| *e | Left of Vehicle |
| *f | Clamp |
| *g | Connector |
Type B:
Connect the 2 water hose sub-assemblies with the 2 clamps as shown in the illustration.
Connect the connector.
87209
3.CONNECT WATER HOSE SUB-ASSEMBLY (for Front Side, LHD)
| *a | View A |
| *b | Front of Vehicle |
| *c | Rear of Vehicle |
| *d | Right of Vehicle |
| *e | Left of Vehicle |
| *f | Clamp |
| *g | Connector |
Connect the 2 water hose sub-assemblies with the 2 clamps as shown in the illustration.
Connect the connector.
87209
4.CONNECT WATER HOSE SUB-ASSEMBLY (for Rear Side, RHD)
| *a | View A |
| *b | Front of Vehicle |
| *c | Rear of Vehicle |
| *d | Right of Vehicle |
| *e | Left of Vehicle |
| *f | Clamp |
| *g | Connector |
Connect the 2 water hose sub-assemblies with the 2 clamps as shown in the illustration.
Connect the connector.
87209
5.CONNECT WATER HOSE SUB-ASSEMBLY (for Rear Side, LHD)
| *a | View A |
| *b | Front of Vehicle |
| *c | Rear of Vehicle |
| *d | Right of Vehicle |
| *e | Left of Vehicle |
| *f | Clamp |
| *g | Connector |
Connect the 2 water hose sub-assemblies with the 2 clamps as shown in the illustration.
Connect the connector.
6.ADD ENGINE COOLANT (for 1HZ)
7.ADD ENGINE COOLANT (for 2TR-FE)
8.ADD ENGINE COOLANT (for N04C-UH, N04C-VL, N04C-VQ, N04C-WA)
for N04C-UH:
Click hereEngine / Hybrid System>N04C-UH (COOLING)>COOLANT>REPLACEMENT
for N04C-VL:
Click hereEngine / Hybrid System>N04C-VL (COOLING)>COOLANT>REPLACEMENT
for N04C-VQ:
Click hereEngine / Hybrid System>N04C-VQ (COOLING)>COOLANT>REPLACEMENT
for N04C-WA:
Click hereEngine / Hybrid System>N04C-WA (COOLING)>COOLANT>REPLACEMENT
9.INSPECT FOR ENGINE COOLANT LEAK (for 1HZ)
10.INSPECT FOR ENGINE COOLANT LEAK (for 2TR-FE)
11.INSPECT FOR ENGINE COOLANT LEAK (for N04C-UH, N04C-VL, N04C-VQ, N04C-WA)
for N04C-UH:
Click hereEngine / Hybrid System>N04C-UH (COOLING)>COOLANT>REPLACEMENT
for N04C-VL:
Click hereEngine / Hybrid System>N04C-VL (COOLING)>COOLANT>REPLACEMENT
for N04C-VQ:
Click hereEngine / Hybrid System>N04C-VQ (COOLING)>COOLANT>REPLACEMENT
for N04C-WA:
Click hereEngine / Hybrid System>N04C-WA (COOLING)>COOLANT>REPLACEMENT
12.INSTALL REAR SEAT ASSEMBLY LH
for 2-Passenger Seat with Separate Type Seatback:
for 2-Passenger Seat with Bench Type Seatback:
for Single-Passenger Seat with 3 Point Type Seat Belt:
for Single-Passenger Seat without 3 Point Type Seat Belt:
13.INSTALL REAR SEAT ASSEMBLY RH
for 2-Passenger Seat with Separate Type Seatback:
for 2-Passenger Seat with Bench Type Seatback:
for Single-Passenger Seat with 3 Point Type Seat Belt:
for Single-Passenger Seat without 3 Point Type Seat Belt: