88471
1.INSTALL RECEIVER AIR CONDITIONING TANK
Remove the vinyl tape wrapped around the connection of the cooler refrigerant liquid pipe A and receiver air conditioning tank.
Sufficiently apply compressor oil to 2 new O-rings and the fitting surface of the cooler refrigerant liquid pipe A and receiver air conditioning tank.
ND-OIL 8 or equivalent
Do not use any compressor oil other than ND-OIL 8 or equivalent. If any compressor oil other than ND-OIL 8 or equivalent is used, compressor motor insulation performance may decrease, resulting in leakage of electric power.
Install the 2 O-rings to the cooler refrigerant liquid pipe A.
Keep the O-rings and O-ring fitting surfaces free from foreign matter.
Move the bracket as shown in the illustration and temporarily install the 2 receiver air conditioning tanks.
Install the cooler refrigerant liquid pipe A with the 4 bolts.
Make sure not to cut the O-ring while installing it. (Cut O-rings cannot be installed)
Install the under cover with the 7 bolts.
88716B
2.INSTALL COOLER REFRIGERANT LIQUID PIPE B
59401
3.INSTALL COOLER CONDENSER COVER SUB-ASSEMBLY
4. CHARGE REFRIGERANT
5. WARM UP ENGINE
6.INSPECT FOR REFRIGERANT LEAK