Home › Brake › BRAKE SYSTEM (OTHER) › BRAKE BOOSTER (for RHD) › from 2021.01
RM2850E _54 Brake _073226 BRAKE SYSTEM (OTHER) _0456402 BRAKE BOOSTER(for RHD) A

BRAKE SYSTEM (OTHER)  BRAKE BOOSTER(for RHD)  INSTALLATION  


PROCEDURE

Hide 47264D 1.INSTALL BRAKE MASTER CYLINDER PUSH ROD CLEVIS

a.

Temporarily install the lock nut and brake master cylinder push rod clevis to the brake booster assembly.

HINT:

Tighten the lock nut when adjusting the brake pedal height.



Hide 44610 2.INSTALL BRAKE BOOSTER ASSEMBLY

a.
C373140

Install the brake booster assembly to the pedal bracket sub-assembly with the 4 nuts.

Torque:

13 N*m (133 kgf*cm, 10 ft.*lbf)



b.

Install push rod pin (Click hereBrake>BRAKE SYSTEM (OTHER)>BRAKE PEDAL>INSTALLATION).


Hide 55106D 3.INSTALL PEDAL BRACKET SUB-ASSEMBLY

a.
C373981E01
0.76,0.458 0.917,0.656 0.156,0.198 10 false B 1.865,0.479 2.021,0.677 0.156,0.198 10 false C 2.604,0.49 2.76,0.688 0.156,0.198 10 false C 0.854,2.156 1.021,2.354 0.167,0.198 10 true A 1.594,2.885 1.76,3.083 0.167,0.198 10 true A 1.948,4.01 2.115,4.208 0.167,0.198 10 true A 2.938,3.875 3.104,4.073 0.167,0.198 10 true A

Install the pedal bracket sub-assembly with the 5 bolts and 2 nuts.

Torque:
bolt A:

19 N*m (194 kgf*cm, 14 ft.*lbf)


Torque:
bolt B:

8.0 N*m (82 kgf*cm, 71 in.*lbf)


Torque:
nut C:

20 N*m (199 kgf*cm, 14 ft.*lbf)



b.

Connect the clamps to the pedal bracket sub-assembly.


Hide 4.CONNECT VACUUM HOSE ASSEMBLY

a.

Connect the vacuum hose assembly to the brake booster assembly with the clip.


Hide 5.CONNECT NO. 1 CLUTCH BOOSTER VACUUM HOSE

Hide 6.INSTALL BRAKE TUBE

a.

Temporarily install a new clamp to the brake pedal bracket sub-assembly with the bolt.


b.

Temporarily connect the 2 brake tubes and the master cylinder to tube connector to the tube connector.


c.

Connect the 2 brake tubes and the master cylinder to tube connector to the clamp.


d.

Install the clamp to the brake pedal bracket sub-assembly with the bolt.

Torque:

7.5 N*m (76 kgf*cm, 66 in.*lbf)



e.
C373131E01
2.885,3.063 2.771,3.063 2.771,3.063 2.771,2.635 false 1.844,2.917 2.156,3.115 0.313,0.198 10 false *a 2.927,2.979 3.135,3.188 0.208,0.208 10 false *b

Using a union nut wrench, tighten the 2 brake tubes and the master cylinder to tube connector to the tube connector.

Torque:
Specified tightening torque:

24 N*m (245 kgf*cm, 18 ft.*lbf)


HINT:
·

Calculate the torque wrench reading when changing the fulcrum length of the torque wrench (Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION).

·

When using a union nut wrench (fulcrum length of 20 mm (0.787 in.)) + torque wrench (fulcrum length of 180 mm (7.09 in.)): 22 N*m (224 kgf*cm, 16 ft.*lbf)



Text in illustration
*a Torque Wrench Fulcrum Length
*b Union Nut Wrench


Hide 47201 7.INSTALL BRAKE MASTER CYLINDER SUB-ASSEMBLY

Hide 55305C 8.INSTALL INSTRUMENT PANEL REINFORCEMENT SUB-ASSEMBLY

a.

Install the instrument panel reinforcement sub-assembly with the 4 bolts.

Torque:

18 N*m (184 kgf*cm, 13 ft.*lbf)



Hide 55330B 9.INSTALL INSTRUMENT PANEL REINFORCEMENT ASSEMBLY

Hide 10.INSTALL STEERING COLUMN ASSEMBLY

Hide 55301 11.INSTALL INSTRUMENT PANEL SUB-ASSEMBLY