Home › Vehicle Interior › AIR CONDITIONING › REAR HEATER UNIT › from 2021.01
RM2850E _58 Vehicle Interior _073207 AIR CONDITIONING _0356309 REAR HEATER UNIT A

AIR CONDITIONING  REAR HEATER UNIT  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for LHD and RHD vehicles.

·

The procedure listed below is for the RHD vehicles.



PROCEDURE

Hide 87120 1.INSTALL REAR HEATER ASSEMBLY

a.

for Front Side:

i.

Install the rear heater assembly with the 3 bolts.

Torque:
7.0 N*m (71 kgf*cm, 62 in.*lbf)



b.

for Rear Side:

i.

Install the rear heater assembly with the 2 bolts and nut.

Torque:
7.0 N*m (71 kgf*cm, 62 in.*lbf)



Hide 87209 2.CONNECT WATER HOSE SUB-ASSEMBLY (for Front Side, RHD)

a.
E361676C02
0.615,1.99 0.927,2.188 0.313,0.198 10 false *a 0.573,2.448 0.885,2.646 0.313,0.198 10 false *b 1.521,2.656 1.833,2.854 0.313,0.198 10 false *b 1.583,2.458 1.896,2.656 0.313,0.198 10 false *c 2.542,2.667 2.854,2.865 0.313,0.198 10 false *c 1.156,2.01 1.469,2.208 0.313,0.198 10 false *e 2.063,2.177 2.375,2.375 0.313,0.198 10 false *e 1.188,2.854 1.5,3.052 0.313,0.198 10 false *d 2.052,3.146 2.365,3.344 0.313,0.198 10 false *d 2.417,1.563 2.635,1.76 0.219,0.198 10 true *a 1.969,0.938 2.188,1.135 0.219,0.198 10 true *f 3.156,1.26 3.375,1.458 0.219,0.198 10 true *f 0.813,0 1.031,0.198 0.219,0.198 10 true *g 1.469,0.781 1.688,0.979 0.219,0.198 10 true *h
*a View A
*b Front of Vehicle
*c Rear of Vehicle
*d Right of Vehicle
*e Left of Vehicle
*f Clamp
*g Connector
*h Bolt


Type A:

i.

Connect the 2 water hose sub-assemblies with the 2 clamps as shown in the illustration.


ii.

Connect the connector.


iii.

Attach the guide.


iv.

Install the bolt.



b.
E365112C01
2.094,1.281 2.323,1.479 0.229,0.198 10 true *a 0.5,2.052 0.813,2.25 0.313,0.198 10 false *a 0.51,2.615 0.823,2.813 0.313,0.198 10 false *b 1.063,2.063 1.375,2.26 0.313,0.198 10 false *e 1.083,3.156 1.396,3.354 0.313,0.198 10 false *d 1.542,2.719 1.854,2.917 0.313,0.198 10 false *c 1.75,2.719 2.063,2.917 0.313,0.198 10 false *b 2.76,2.625 3.073,2.823 0.313,0.198 10 false *c 2.167,2.063 2.479,2.26 0.313,0.198 10 false *e 2.188,3.146 2.5,3.344 0.313,0.198 10 false *d 2.563,0.427 2.76,0.625 0.198,0.198 10 true *f 1.604,0.438 1.792,0.635 0.188,0.198 10 true *f 1.406,1.5 1.625,1.74 0.219,0.24 10 true *g
*a View A
*b Front of Vehicle
*c Rear of Vehicle
*d Right of Vehicle
*e Left of Vehicle
*f Clamp
*g Connector


Type B:

i.

Connect the 2 water hose sub-assemblies with the 2 clamps as shown in the illustration.


ii.

Connect the connector.



Hide 87209 3.CONNECT WATER HOSE SUB-ASSEMBLY (for Front Side, LHD)

a.
E365111C01
0.521,2.073 0.833,2.271 0.313,0.198 10 false *a 0.99,1.385 1.229,1.604 0.24,0.219 10 true *a 1.521,2.74 1.833,2.938 0.313,0.198 10 false *b 1.063,2.073 1.375,2.271 0.313,0.198 10 false *e 2.781,2.635 3.094,2.833 0.313,0.198 10 false *b 0.521,2.604 0.833,2.802 0.313,0.198 10 false *c 1.781,2.729 2.094,2.927 0.313,0.198 10 false *c 1.083,3.156 1.396,3.354 0.313,0.198 10 false *d 2.208,3.156 2.521,3.354 0.313,0.198 10 false *d 2.177,2.073 2.49,2.271 0.313,0.198 10 false *e 0.667,0.49 0.844,0.677 0.177,0.188 10 true *f 0.344,0.958 0.531,1.146 0.188,0.188 10 true *f 2.896,0.844 3.104,1.063 0.208,0.219 10 true *g
*a View A
*b Front of Vehicle
*c Rear of Vehicle
*d Right of Vehicle
*e Left of Vehicle
*f Clamp
*g Connector


Connect the 2 water hose sub-assemblies with the 2 clamps as shown in the illustration.


b.

Connect the connector.


Hide 87209 4.CONNECT WATER HOSE SUB-ASSEMBLY (for Rear Side, RHD)

a.
E361679C02
0.458,2.052 0.771,2.25 0.313,0.198 10 false *a 2.927,1.094 3.188,1.292 0.26,0.198 10 true *a 0.458,2.594 0.771,2.792 0.313,0.198 10 false *b 1.729,2.719 2.052,2.917 0.323,0.198 10 false *b 1.469,2.708 1.781,2.906 0.313,0.198 10 false *c 2.698,2.573 3.01,2.771 0.313,0.198 10 false *c 2.135,3.125 2.448,3.323 0.313,0.198 10 false *d 1.021,3.125 1.333,3.323 0.313,0.198 10 false *d 1.01,2.052 1.323,2.25 0.313,0.198 10 false *e 2.125,2.052 2.438,2.25 0.313,0.198 10 false *e 3.031,0.333 3.219,0.51 0.188,0.177 10 true *f 2.021,0.344 2.208,0.521 0.188,0.177 10 true *f 0.229,1.75 0.448,1.948 0.219,0.198 10 true *g
*a View A
*b Front of Vehicle
*c Rear of Vehicle
*d Right of Vehicle
*e Left of Vehicle
*f Clamp
*g Connector


Connect the 2 water hose sub-assemblies with the 2 clamps as shown in the illustration.


b.

Connect the connector.


Hide 87209 5.CONNECT WATER HOSE SUB-ASSEMBLY (for Rear Side, LHD)

a.
E365113C01
0.531,2.063 0.844,2.26 0.313,0.198 10 false *a 0.76,1.094 0.99,1.313 0.229,0.219 10 true *a 1.531,2.719 1.844,2.917 0.313,0.198 10 false *b 2.771,2.625 3.083,2.823 0.313,0.198 10 false *b 0.542,2.604 0.854,2.802 0.313,0.198 10 false *c 1.771,2.719 2.083,2.917 0.313,0.198 10 false *c 1.083,3.146 1.396,3.344 0.313,0.198 10 false *d 2.188,3.156 2.5,3.354 0.313,0.198 10 false *d 1.052,2.073 1.365,2.271 0.313,0.198 10 false *e 2.167,2.073 2.479,2.271 0.313,0.198 10 false *e 0.635,0.188 0.844,0.365 0.208,0.177 10 true *f 0.917,0.188 1.135,0.365 0.219,0.177 10 true *f 2.698,1.677 2.927,1.885 0.229,0.208 10 true *g
*a View A
*b Front of Vehicle
*c Rear of Vehicle
*d Right of Vehicle
*e Left of Vehicle
*f Clamp
*g Connector


Connect the 2 water hose sub-assemblies with the 2 clamps as shown in the illustration.


b.

Connect the connector.


Hide 6.ADD ENGINE COOLANT (for 1HZ)

Hide 7.ADD ENGINE COOLANT (for 2TR-FE)

Hide 9.INSPECT FOR ENGINE COOLANT LEAK (for 1HZ)

Hide 10.INSPECT FOR ENGINE COOLANT LEAK (for 2TR-FE)

Hide 12.INSTALL REAR SEAT ASSEMBLY LH

Hide 13.INSTALL REAR SEAT ASSEMBLY RH