Home › Engine / Hybrid System › N04C-VJ (COOLING) › THERMOSTAT › from 2021.01
RM2850E _51 Engine / Hybrid System _096896 N04C-VJ COOLING _0462334 THERMOSTAT A

N04C-VJ COOLING  THERMOSTAT  INSTALLATION  


PROCEDURE

Hide 16331A 1.INSTALL THERMOSTAT

a.

Install a new gasket to the thermostat.


b.
A261310C02
1.323,1.083 0.667,1.083 true 0.771,0.427 1.354,0.979 true 1.688,0.792 2.125,0.375 true 0.49,1.021 0.667,1.208 0.177,0.188 10 false *b 2.125,0.25 2.302,0.438 0.177,0.188 10 false *c 0.583,0.302 0.76,0.49 0.177,0.188 10 false *a 1.615,0.135 1.865,0.406 0.25,0.271 10 false 3°
*a Part A
*b Stopper
*c Jiggle Valve


Install the thermostat so that part A of the thermostat contacts the stopper on the inside of the case and the jiggle valve is near the top as shown in the illustration.


c.

Install the water outlet with the 3 bolts.

Torque:
28.5 N*m (291 kgf*cm, 21 ft.*lbf)


Hide 16571 2.CONNECT INLET RADIATOR HOSE

Hide 12203 3.CONNECT PCV PIPE SUB-ASSEMBLY

Hide 17341K 5.CONNECT NO. 1 INTERCOOLER AIR HOSE

Hide 58701A 8.INSTALL FRONT ENGINE SERVICE COVER PANEL SUB-ASSEMBLY

Hide 33820B 9.CONNECT TRANSMISSION CONTROL CABLE ASSEMBLY

Hide 58420 11.INSTALL NO. 2 ENGINE SERVICE HOLE COVER ASSEMBLY

Hide 58734B 12.INSTALL REAR ENGINE SERVICE COVER WEATHERSTRIP

Hide 58410 13.INSTALL ENGINE SERVICE HOLE COVER

Hide 58521D 14.INSTALL ENGINE SERVICE HOLE COVER MAT