28100
1.INSTALL STARTER ASSEMBLY
Install the starter assembly with the bolt and nut.
71 N*m (724 kgf*cm, 52 ft.*lbf)
|
Bolt |
|
Nut |
Install the wire harness clamp bracket with the bolt (B).
19 N*m (194 kgf*cm, 14 ft.*lbf)
Connect the No.2 engine wire with the 2 wire harness clamps.
Install the bolt (A) and nut.
for bolt (A): 19 N*m (194 kgf*cm, 14 ft.*lbf)
for nut: 5.0 N*m (51 kgf*cm, 44 in.*lbf)
|
Bolt |
|
Nut |
Connect the terminal 50 connector to the starter assembly.
Connect the wire harness to terminal 30 with the nut, and install the terminal cap.
21 N*m (214 kgf*cm, 15 ft.*lbf)
53712C
2.INSTALL FRONT FENDER APRON LH
51446C
3.INSTALL ENGINE UNDER COVER BRACKET LH
51445D
4.INSTALL ENGINE UNDER COVER BRACKET RH
51441D
5.INSTALL NO. 1 ENGINE UNDER COVER
6.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL