Home › Engine / Hybrid System › N04C-VQ (ENGINE CONTROL) › ECD SYSTEM › from 2019.08
RM2850E _51 Engine / Hybrid System _073138 N04C-VQ ENGINE CONTROL _0355854 ECD SYSTEM C

N04C-VQ ENGINE CONTROL  ECD SYSTEM  P0087  Fuel Rail / System Pressure - Too Low  P0190  Fuel Rail Pressure Sensor Circuit  P0191  Fuel Rail Pressure Sensor Circuit Range / Performance  P0192  Fuel Rail Pressure Sensor Circuit Low Input  P0193  Fuel Rail Pressure Sensor Circuit High Input  


DESCRIPTION

The fuel pressure sensor, mounted on the common rail assembly, converts the fuel pressure into an electric signal and outputs the signal to the ECM. Based on the signal from the fuel pressure sensor, the ECM controls the injection or supply pump assembly (suction control valve) and keeps the internal fuel pressure of the common rail assembly at the target fuel pressure.

DTC No. DTC Detection Condition Trouble Area
P0087 Conditions (a), (b) and (c) are met 10 times with engine speed 580 rpm or more (1 trip detection logic):

(a) Battery voltage: 8 V or more

(b) Fuel quantify: 28 mm3/st or more

(c) Amount of change in fuel pressure applied to common rail assembly: 100 kPa or less


·

Open or short in fuel pressure sensor circuit

·

Fuel pressure sensor (built into common rail assembly)

·

ECM


P0190 Conditions (a) and (b) continue for 1 seconds or more (1 trip detection logic):

(a) Ignition switch to ON

(b) Open or short in fuel pressure sensor 1 circuit


·

Open or short in fuel pressure sensor circuit

·

Fuel pressure sensor (built into common rail assembly)

·

ECM


Conditions (a) and (b) continue for 1 seconds or more (1 trip detection logic):

(a) Ignition switch to ON

(b) Open or short in fuel pressure sensor 2 circuit


P0191 Conditions (a) continues for 1 second (1 trip detection logic):

(a) The difference between the main and sub voltage outputs of fuel pressure sensor is below 0.04 V, or high than 1.06 V


·

Open or short in fuel pressure sensor circuit

·

Fuel pressure sensor (built into common rail assembly)

·

ECM


P0192 Condition (a) continues for 0.5 seconds or more (1 trip detection logic):

(a) Fuel pressure sensor 1 and 2 output voltage is below 0.55 V


·

Open or short in fuel pressure sensor circuit

·

Fuel pressure sensor (built into common rail assembly)

·

ECM


P0193 Condition (a) continues for 0.5 seconds or more (1 trip detection logic):

(a) Fuel pressure sensor 1 and 2 output voltage is 4.9 V or high


·

Open or short in fuel pressure sensor circuit

·

Fuel pressure sensor (built into common rail assembly)

·

ECM



HINT:
·

If the vehicle runs out of fuel, and the ECM determines that the fuel pressure has decreased, DTC P0190 or P0192 may be output.

·

When DTC P0087, P0190, P0191, P0192 and/or P0193 are stored, check the internal fuel pressure of the common rail assembly by entering the following menus on the GTS: Powertrain / Engine and ECT / Data List / Fuel Press.


Fuel Pressure Malfunction
Approximately 0 kPa (0 kgf/cm2, 0 psi)
·

Short in PCR1 and E2 termina

·

Short in PCR2 and E21 terminal

·

Open in VC circuit

·

Open in VC2 circuit


Approximately 190000 kPa (1937 kgf/cm2, 27557 psi) or more
·

Short in PCR1 and VC circuit

·

Short in PCR2 and VC2 circuit

·

Open in PCR1 circuit

·

Open in PCR2 circuit

·

Open in E2 circuit

·

Open in E21 circuit




WIRING DIAGRAM

A398532E04
1.427,0.688 1.865,0.885 0.438,0.198 10 false SCV+ 1.469,1.333 1.885,1.521 0.417,0.188 10 false SCV- 5.26,0.688 5.615,0.854 0.354,0.167 10 false B103 5.25,1.344 5.635,1.552 0.385,0.208 10 false B103 5.26,2.823 5.656,3.031 0.396,0.208 10 false B105 5.26,3.385 5.656,3.583 0.396,0.198 10 false B105 5.26,3.938 5.667,4.115 0.406,0.177 10 false B105 5.25,4.51 5.656,4.698 0.406,0.188 10 false B104 5.26,5.052 5.688,5.25 0.427,0.198 10 false B105 5.26,5.625 5.615,5.833 0.354,0.208 10 false B104 5.25,6.135 5.656,6.344 0.406,0.208 10 false B102 5.365,0.5 5.677,0.698 0.313,0.198 10 false 23 5.354,1.156 5.667,1.354 0.313,0.198 10 false 12 5.344,2.625 5.656,2.823 0.313,0.198 10 false 13 5.375,3.188 5.688,3.385 0.313,0.198 10 false 2 5.344,3.729 5.656,3.927 0.313,0.198 10 false 14 5.333,4.302 5.646,4.5 0.313,0.198 10 false 14 5.333,4.865 5.646,5.063 0.313,0.198 10 false 16 5.333,5.417 5.646,5.615 0.313,0.198 10 false 13 5.385,5.938 5.698,6.135 0.313,0.198 10 false 1 1.427,3.385 1.865,3.583 0.438,0.198 10 false PCR2 1.51,2.844 1.854,3.042 0.344,0.198 10 false VC2 0.667,1.854 0.979,2.031 0.313,0.177 10 false B52 0.667,2.021 3.177,2.396 2.51,0.375 10 false Injection or Fuel Supply Pump Assembly (Suction Control Valve) 0.469,6.229 2.427,6.604 1.958,0.375 10 false Fuel Pressure Sensor (Built into Common Rail Assembly) 0.469,6.063 0.781,6.24 0.313,0.177 10 false B93 1.604,3.958 1.896,4.156 0.292,0.198 10 false E2 1.615,4.5 1.906,4.708 0.292,0.208 10 false E1 1.438,5.063 1.854,5.26 0.417,0.198 10 false PCR1 1.531,5.615 1.875,5.813 0.344,0.198 10 false VC1 5.708,3.385 6.198,3.573 0.49,0.188 10 false PCR2 1.938,1.229 2.25,1.427 0.313,0.198 10 false 2 1.948,0.573 2.26,0.771 0.313,0.198 10 false 1 1.927,5.5 2.24,5.698 0.313,0.198 10 false 1 1.938,4.927 2.25,5.125 0.313,0.198 10 false 2 1.948,4.375 2.26,4.573 0.313,0.198 10 false 3 1.938,3.833 2.25,4.031 0.313,0.198 10 false 4 1.948,3.281 2.26,3.479 0.313,0.198 10 false 5 1.938,2.708 2.25,2.906 0.313,0.198 10 false 6 5.698,1.354 6.188,1.542 0.49,0.188 10 false PCV- 5.708,2.833 6.198,3.021 0.49,0.188 10 false VC2 5.698,0.698 6.188,0.885 0.49,0.188 10 false PCV+ 5.719,4.49 5.958,4.667 0.24,0.177 10 false E2 5.719,3.938 6.208,4.125 0.49,0.188 10 false E21 5.708,5.063 6.156,5.24 0.448,0.177 10 false PCR1 5.708,6.125 5.948,6.302 0.24,0.177 10 false E1 5.708,5.625 5.969,5.823 0.26,0.198 10 false VC 5.99,6.625 6.354,6.813 0.365,0.188 10 false ECM

CAUTION / NOTICE / HINT

NOTICE:

After replacing the ECM, the new ECM needs registration (Click hereEngine / Hybrid System>N04C-VQ (ENGINE CONTROL)>ECD SYSTEM>REGISTRATION) and initialization (Click hereEngine / Hybrid System>N04C-VQ (ENGINE CONTROL)>ECD SYSTEM>INITIALIZATION).


HINT:

Read freeze frame data using the GTS. The ECM records vehicle and driving condition information as freeze frame data the moment a DTC is stored. When troubleshooting, freeze frame data can be helpful in determining whether the vehicle was moving or stationary, whether the engine was warmed up or not, as well as other data recorded at the time of a malfunction.


PROCEDURE

1.INSPECT ECM (OUTPUT VOLTAGE)
a.
A260250E29
1.302,0.104 1.792,0.396 0.49,0.292 1.844,0.104 2.333,0.396 0.49,0.292 2.24,0.875 2.917,1.729 true 2.177,0.875 2.333,1.74 true 1.75,0.875 1.677,1.719 true 1.677,0.875 1,1.74 true 1.396,0.167 1.813,0.323 0.417,0.156 10 false B105 1.938,0.167 2.417,0.323 0.479,0.156 10 false B104 0.063,0.073 0.25,0.281 0.188,0.208 10 false *a 1.479,1.76 2.115,2.031 0.635,0.271 10 false 13 (VC2) 2.729,1.76 3.427,2 0.698,0.24 10 false 13 (VC) 2.146,1.771 2.844,2.01 0.698,0.24 10 false 14 (E2) 0.771,1.771 1.406,2.042 0.635,0.271 10 false 14 (E21)

Turn the ignition switch to ON.


b.

Measure the voltage according to the value(s) in the table below.

Standard Voltage:
Tester Connection Switch Condition Specified Condition
B104-13 (VC) - B104-14 (E2) Ignition switch ON 4.5 to 5.5 V
B105-13 (VC2) - B105-14 (E21) Ignition switch ON 4.5 to 5.5 V


Text in Illustration
*a Component with harness connected
(ECM)


Result:
Proceed to
OK
NG



OK

2.INSPECT ECM (PCR VOLTAGE)

NG

2.INSPECT ECM (PCR VOLTAGE)
a.

Start the engine.


A260250E30
1.302,0.104 1.792,0.396 0.49,0.292 1.844,0.104 2.333,0.396 0.49,0.292 2.188,0.865 2.917,1.729 true 1.688,0.875 2.271,1.76 true 1.521,0.875 0.49,1.75 true 1.688,0.719 1.302,1.74 true 1.396,0.167 1.813,0.323 0.417,0.156 10 false B105 1.938,0.167 2.417,0.323 0.479,0.156 10 false B104 0.063,0.073 0.25,0.281 0.188,0.208 10 false *a 1.042,1.76 1.677,2.031 0.635,0.271 10 false 2 (PCR2) 0.292,1.76 0.99,2 0.698,0.24 10 false 16 (PCR1) 2.729,1.771 3.427,2.01 0.698,0.24 10 false 14 (E2) 2.125,1.771 2.76,2.042 0.635,0.271 10 false 14 (E21)

b.

Measure the voltage according to the value(s) in the table below.

Standard Voltage:
Tester Connection Condition Specified Condition
B105-16 (PCR1) - B104-14 (E2) Idling 1.7 to 2.2 V
B105-2 (PCR2) - B105-14 (E21) Idling 1.2 to 1.6 V


Text in Illustration
*a Component with harness connected
(ECM)


Result:
Proceed to
OK
NG



OK

NG

3.CHECK HARNESS AND CONNECTOR (FUEL PRESSURE SENSOR - ECM)
3.CHECK HARNESS AND CONNECTOR (FUEL PRESSURE SENSOR - ECM)
a.

Disconnect the ECM connector.


b.

Disconnect the fuel pressure sensor connector.


c.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
B105-16 (PCR1) - B93-2 (PCR1) Always Below 1 Ω
B104-13 (VC) - B93-1 (VC1) Always Below 1 Ω
B104-14 (E2) - B93-3 (E1) Always Below 1 Ω
B105-2 (PCR2) - B93-5 (PCR2) Always Below 1 Ω
B105-13 (VC2) - B93-6 (VC2) Always Below 1 Ω
B105-14 (E21) - B93-4 (E2) Always Below 1 Ω
B105-16 (PCR1) or B93-2 (PCR1) - Body ground Always 10 kΩ or higher
B104-13 (VC) or B93-1 (VC1) - Body ground Always 10 kΩ or higher
B105-2 (PCR2) or B93-5 (PCR2) - Body ground Always 10 kΩ or higher
B105-13 (VC2) or B93-6 (VC2) - Body ground Always 10 kΩ or higher
B104-14 (E2) or B93-3 (E1) - Other terminals Always 10 kΩ or higher
B105-14 (E21) or B93-4 (E2) - Other terminals Always 10 kΩ or higher



Result:
Proceed to
OK
NG



OK

REPLACE COMMON RAIL ASSEMBLY (FUEL PRESSURE SENSOR)

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR