16371
1.INSTALL FAN PULLEY
Install the fan pulley to the engine water pump assembly.
16361
2.INSTALL FAN
Install the fan to the fluid coupling assembly with the 4 nuts.
11 N*m (112 kgf*cm, 8 ft.*lbf)
16701
3.INSTALL FAN SHROUD SUB-ASSEMBLY
Temporarily install the fan shroud sub-assembly together with the fluid coupling assembly.
Be careful not to damage the radiator core.
Install the fan shroud sub-assembly with the 4 bolts.
5.0 N*m (51 kgf*cm, 44 ft.*lbf)
Install the fan and generator V belt.
Click hereEngine / Hybrid System>N04C-UH (ENGINE MECHANICAL)>DRIVE BELT>INSTALLATION
Install the fluid coupling assembly with the 4 nuts.
29 N*m (291 kgf*cm, 21 ft.*lbf)
Engage the 3 hose clamps and install the radiator reservoir hose.
Engage the hose clamp and install the No. 1 intercooler air hose.
16572
4.CONNECT OUTLET RADIATOR HOSE
Connect the outlet radiator hose and slide the 2 hose clamps to secure the hose.
| *a | View A |
| *b | View B |
| *c | Upper Side |
| *d | RH Side |
| *e | LH Side |
Perform the installation with the hose clamp at the correct angle.
5.INSTALL NO. 1 V (COOLER COMPRESSOR TO CRANKSHAFT PULLEY) BELT (w/ Air Conditioning System)
88320
6.INSTALL COOLER COMPRESSOR ASSEMBLY (w/ Air Conditioning System)
58701A
7.INSTALL FRONT ENGINE SERVICE COVER PANEL SUB-ASSEMBLY
33504F
8.INSTALL SHIFT LEVER SUB-ASSEMBLY
33820B
9.CONNECT TRANSMISSION CONTROL CABLE ASSEMBLY
33531B
10.INSTALL SHIFT AND SELECT LEVER SHAFT DUST BOOT
58534A
11.INSTALL TRANSMISSION COVER MAT
58420
12.INSTALL NO. 2 ENGINE SERVICE HOLE COVER ASSEMBLY (for Automatic Transmission)
58420
13.INSTALL NO. 2 ENGINE SERVICE HOLE COVER ASSEMBLY
14.ADD ENGINE COOLANT
15.INSPECT FOR COOLANT LEAK
16.INSPECT FOR OIL LEAK
58521D
17.INSTALL ENGINE SERVICE HOLE COVER MAT
58734B
18.INSTALL ENGINE SERVICE COVER REAR WEATHERSTRIP
58410
19.INSTALL ENGINE SERVICE HOLE COVER