Home › Engine / Hybrid System › 2GR-FE EMISSION CONTROL › VACUUM SWITCHING VALVE
RM24M0E _51 Engine / Hybrid System _059544 2GR-FE EMISSION CONTROL _0291810 VACUUM SWITCHING VALVE A

2GR-FE EMISSION CONTROL  VACUUM SWITCHING VALVE  REMOVAL  


PROCEDURE

Hide 28800 1.DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:

Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.


NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See page General>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION).


Hide 25860 3.REMOVE PURGE VSV

a.
U188351

Disconnect the purge VSV connector.


b.

Disconnect the 2 purge line hoses from the purge VSV.


c.

Remove the purge VSV from the air cleaner hose.


d.
A132953

Remove the bolt and No. 1 vacuum switching valve.