11301C
1.INSTALL TIMING CHAIN CASE OIL SEAL
Apply MP grease to a new oil seal lip.
Using SST and a hammer, tap in the oil seal until its surface is flush with the timing chain cover edge.
0 to 1 mm (0 to 0.039 in.)
Keep the lip free of foreign matter.
Do not tap the oil seal at an angle.
13471
2.INSTALL CRANKSHAFT PULLEY
Type A and Type B can be distinguished by the number on the head of the crankshaft pulley set bolt.
| *a | Type A |
| *b | Type B |
| Type | Number on the Head |
|---|---|
| A | 11 |
| B | 10 |
Align the pulley set key with the key groove of the pulley, and slide on the pulley.
Using SST, install the pulley bolt.
16361A
3.INSTALL V-RIBBED BELT
11209
4.INSTALL V-BANK COVER ASSEMBLY
53736
5.INSTALL FRONT FENDER APRON SEAL RH
6.INSTALL FRONT WHEEL RH
T = 103 N*m{ 1,050 kgf*cm 76 ft.*lbf }