Home › Engine / Hybrid System › 2GR-FE COOLING › THERMOSTAT
RM24M0E _51 Engine / Hybrid System _059551 2GR-FE COOLING _0291843 THERMOSTAT A

2GR-FE COOLING  THERMOSTAT  REMOVAL  


PROCEDURE

Hide 51441 2.REMOVE NO. 1 ENGINE UNDER COVER

Hide 81135 4.REMOVE HEADLIGHT ASSEMBLY RH

Hide 5.REMOVE FRONT WHEEL RH

Hide 53701 6.REMOVE FRONT FENDER APRON RH

Hide 16572D 8.DISCONNECT NO. 2 RADIATOR HOSE

a.
A162797

Disconnect the No. 2 radiator hose from the engine.


Hide 16604 9.REMOVE NO. 2 IDLER PULLEY SUB-ASSEMBLY

a.
A162789

Remove the bolt, idler pulley cover plate and idler pulley sub-assembly.


Hide 16321 10.REMOVE WATER INLET

a.
A162796

Remove the 2 nuts and water inlet.


Hide 16331A 11.REMOVE THERMOSTAT

a.

Remove the gasket from the thermostat.