Home › Engine / Hybrid System › 2AZ-FE LUBRICATION › ENGINE OIL COOLER
RM24M0E _51 Engine / Hybrid System _059554 2AZ-FE LUBRICATION _0291862 ENGINE OIL COOLER A

2AZ-FE LUBRICATION  ENGINE OIL COOLER  INSTALLATION  


PROCEDURE

Hide 15710 1.INSTALL ENGINE OIL COOLER

a.

Clean the oil cooler contact surface on the cooler mounting.


b.
A124389E02
0.115,0.126 0.887,0.314 0.772,0.188 10 New O-ring 1.063,0.229 1.228,0.229 1.228,0.229 1.65,0.651 false

Install a new O-ring to the oil cooler.


c.

Apply a light coat of engine oil on the threads and under the head of the oil cooler union.


d.
A114329

Install the oil cooler with the plate washer, union bolt and nut.

Torque:
79 N*m (806 kgf*cm, 58 ft.*lbf)

for union bolt

9.0 N*m (92 kgf*cm, 80 in.*lbf)

for nut



e.

Connect the 2 oil cooler hoses.


Hide 51441 7.INSTALL NO. 1 ENGINE UNDER COVER