89650
1.INSTALL POWER STEERING ECU
Install the ECU with the 2 nuts and bolt.
Connect the 4 ECU connectors.
55302A
2.INSTALL UPPER INSTRUMENT PANEL SUB-ASSEMBLY
Install the upper instrument panel (see page Vehicle Interior>INTERIOR PANEL>UPPER INSTRUMENT PANEL>INSTALLATION).
28800
3.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See Page General>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION).
4.PERFORM INITIALIZATION
Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal (see page General>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION).