28800
1.DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See Page General>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION).
55302A
2.REMOVE UPPER INSTRUMENT PANEL SUB-ASSEMBLY
Remove the upper instrument panel (see page Vehicle Interior>INTERIOR PANEL>UPPER INSTRUMENT PANEL>REMOVAL).
89650
3.REMOVE POWER STEERING ECU
Remove the 4 ECU connectors.
Remove the 2 nuts, bolt and ECU.