Home › Vehicle Interior › SUPPLEMENTAL RESTRAINT SYSTEMS › CENTER FLOOR AIRBAG SENSOR › from 2016.05
RM24M0E _58 Vehicle Interior _059562 SUPPLEMENTAL RESTRAINT SYSTEMS _0291910 CENTER FLOOR AIRBAG SENSOR A

SUPPLEMENTAL RESTRAINT SYSTEMS  CENTER FLOOR AIRBAG SENSOR  REMOVAL  


CAUTION / NOTICE / HINT

CAUTION:

Be sure to read the precautionary notices concerning the SRS airbag system before servicing it (see page Vehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>AIRBAG SYSTEM>PRECAUTION).


PROCEDURE

Hide 28800 1.DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:

Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.


Hide 2.REMOVE FRONT SEAT ASSEMBLY LH

a.

for Manual Seat:

Remove the front seat (see page Vehicle Interior>SEAT>FRONT SEAT ASSEMBLY(for Manual Seat)>REMOVAL).


b.

for Power Seat:

Remove the front seat (see page Vehicle Interior>SEAT>FRONT SEAT ASSEMBLY(for Power Seat)>REMOVAL).


Hide 3.REMOVE CENTER FLOOR AIRBAG SENSOR COVER

a.

Detach the 2 claws to remove the sensor cover.


Hide 4.REMOVE CENTER FLOOR AIRBAG SENSOR

a.
C137830

Disconnect the sensor connector.


b.

Remove the bolt and sensor.


c.

Remove the clip.