Home › Vehicle Interior › SEAT BELT › REAR NO. 1 SEAT OUTER BELT ASSEMBLY(for Captain Seat Type) › from 2016.05
RM24M0E _58 Vehicle Interior _059563 SEAT BELT _0291918 REAR NO. 1 SEAT OUTER BELT ASSEMBLY(for Captain Seat Type) A

SEAT BELT  REAR NO. 1 SEAT OUTER BELT ASSEMBLY(for Captain Seat Type)  INSTALLATION  


PROCEDURE

Hide 73320A 1.INSTALL NO. 1 SEAT 3 POINT TYPE BELT ASSEMBLY LH

B146443

a.

Install the belt with the nut.

Torque:
42 N*m (428 kgf*cm, 31 ft.*lbf)


b.
B146442

Install the belt sensor with the 3 nuts.


c.
B146441

Attach the 4 claws to install the rear shoulder belt cover.


d.
B146440

Pass the seat belt through the guide wire.


e.

Attach the 4 claws to install the rear shoulder belt cover.


Hide 71695A 2.INSTALL REAR SEAT PROTECTOR NO. 1

B148491

a.

Install the rear NO. 1 seat protector with the clip.


Hide 73320A 3.CONNECT NO. 1 SEAT 3 POINT TYPE BELT ASSEMBLY

B140864E02
1.51,1.073 0.958,1.323 0.958,1.323 0.958,1.656 true 1.958,1.313 1.958,1.792 1.958,1.792 1.396,1.792 true 0.281,1.688 1.375,2.021 1.094,0.333 10 true Protruding Part

a.

Install the anchor with the bolt.

Torque:
42 N*m (428 kgf*cm, 31 ft.*lbf)

NOTICE:

The anchor part of the seat belt must not overlap the protruding part.



Hide 72830J 6.INSTALL REAR NO. 1 SEAT ARMREST ASSEMBLY RH

Hide 72840 8.INSTALL REAR NO. 1 SEAT ARMREST ASSEMBLY LH

Hide 71834B 10.INSTALL NO. 2 REAR SEAT RECLINING COVER LH

Hide 71834A 11.INSTALL NO. 1 REAR SEAT RECLINING COVER LH

Hide 72526B 12.INSTALL NO. 1 RECLINING ADJUSTER RELEASE HANDLE LH

Hide 72526C 13.INSTALL NO. 2 RECLINING ADJUSTER RELEASE HANDLE LH