Home › Vehicle Interior › SEAT BELT › REAR NO. 2 SEAT INNER BELT ASSEMBLY(for Power Stowing Seat Type RH Side) › from 2016.05
RM24M0E _58 Vehicle Interior _059563 SEAT BELT _0291926 REAR NO. 2 SEAT INNER BELT ASSEMBLY(for Power Stowing Seat Type RH Side) A

SEAT BELT  REAR NO. 2 SEAT INNER BELT ASSEMBLY(for Power Stowing Seat Type RH Side)  INSTALLATION  


PROCEDURE

Hide 73530A 1.INSTALL REAR NO. 2 SEAT LAP TYPE BELT ASSEMBLY RH

U188819E02
1.125,0.573 1.417,0.573 1.417,0.573 1.417,1.719 true 0.896,1.75 2.115,2.01 1.219,0.26 10 true Protruding Part

a.

Install the belt with the bolt.

Torque:
42 N*m (428 kgf*cm, 31 ft.*lbf)

NOTICE:

The anchor part of the seat belt must not overlap the protruding part.



Hide 73580 2.INSTALL REAR NO. 2 SEAT INNER BELT ASSEMBLY RH

U188818E02
2.313,0.573 2.844,0.573 2.844,0.573 2.844,1.573 true 2.156,1.573 3.271,1.958 1.115,0.385 10 true Protruding Part

a.

Install the belt with the bolt.

Torque:
42 N*m (428 kgf*cm, 31 ft.*lbf)

NOTICE:

The anchor part of the seat belt must not overlap the protruding part.



Hide 73540C 3.INSTALL REAR NO. 2 SEAT LAP TYPE BELT ASSEMBLY

U188820E02
1.438,2.844 0.896,2.083 0.896,2.083 1.635,1.969 false 0.313,1.177 1.281,1.385 0.969,0.208 10 true Protruding Part

a.

Install the belt with the bolt.

Torque:
42 N*m (428 kgf*cm, 31 ft.*lbf)

NOTICE:

The anchor part of the seat belt must not overlap the protruding part.