84152
1.INSTALL HEADLIGHT LEVELING SWITCH
Attach the 2 claws to install the headlight leveling switch.
55432B
2.INSTALL INSTRUMENT PANEL FINISH PANEL LOWER (w/o Driver Side Knee Airbag)
55432B
3.INSTALL INSTRUMENT PANEL FINISH PANEL LOWER (w/ Driver Side Knee Airbag)
55606
4.INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY
55447C
5.INSTALL NO. 1 SWITCH HOLE BASE
55474B
6.INSTALL INSTRUMENT CLUSTER FINISH PANEL GARNISH
7.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
8.PERFORM INITIALIZATION
Perform initialization (see page General>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION).
Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.