Home › Vehicle Interior › WIPER / WASHER › WIPER SWITCH › 2013.04–2016.05
RM24M0E _58 Vehicle Interior _059565 WIPER / WASHER _0291972 WIPER SWITCH A

WIPER / WASHER  WIPER SWITCH  INSTALLATION  


PROCEDURE

Hide 84650 1.INSTALL WIPER AND WASHER SWITCH ASSEMBLY

B145947

a.

Attach the claw to install the wiper switch.


b.

Connect the connectors.


Hide 3.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Hide 4.PERFORM INITIALIZATION

a.

Perform initialization (see page General>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION).

NOTICE:

Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.