1.DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
2.REMOVE FRONT BUMPER ASSEMBLY
for Sport Package: (See page Vehicle Interior>EXTERIOR>FRONT BUMPER(for Sport Package)>REMOVAL)
for Standard: (See page Vehicle Interior>EXTERIOR>FRONT BUMPER(for Standard)>REMOVAL)
3.DRAIN WASHER FLUID
Remove the washer hoses from the windshield washer motor and pump assembly, and drain the washer fluid.
85331
4.REMOVE WINDSHIELD WASHER JAR SUB-ASSEMBLY
Remove the clip.
Pull the washer inlet of the washer jar and pump upward. Then remove it from the windshield washer jar and pump.
w/ Headlight Cleaner:
Disconnect all the connectors.
Remove the 3 bolts. Then remove the washer jar and pump.
w/o Headlight Cleaner:
Disconnect all the connectors.
Remove the 3 bolts. Then remove the washer jar and pump.
85310
5.REMOVE WINDSHIELD WASHER MOTOR AND PUMP ASSEMBLY
Pull out the washer motor and pump from the packing of the washer jar.
85310R
6.REMOVE REAR WASHER MOTOR ASSEMBLY
85310A
7.REMOVE HEADLIGHT CLEANER WASHER MOTOR AND PUMP ASSEMBLY (w/ Headlight Cleaner System)
Pull out the headlight cleaner motor and pump from the packing of the washer jar.