35106L
1.INSTALL TRANSAXLE OIL PAN SUB-ASSEMBLY
Install the 3 magnets to the oil pan.
| *1 | Magnet |
Install a new gasket to the oil pan.
Apply adhesive to 19 new bolts.
Toyota Genuine Adhesive 1324, Three Bond 1324 or equivalent
Install the oil pan to the transaxle with the 19 bolts.
Make sure that there is no oil or foreign matter on the gasket seal surface or oil pan contact surface.
In order to ensure proper sealing of the transaxle oil pan bolts, apply adhesive to the bolts and install them within 10 minutes of adhesive application.
Do not reuse the bolts.
35125
2.INSTALL NO. 1 TRANSMISSION OIL FILLER TUBE
Using a 6 mm socket hexagon wrench, install the No. 1 transmission oil filler tube to the oil pan.
51218A
3.INSTALL FRONT SUSPENSION MEMBER REINFORCEMENT LH
4.ADD CONTINUOUSLY VARIABLE TRANSAXLE FLUID
5.INSPECT FOR OIL LEAK
53702
6.INSTALL FRONT FENDER APRON LH
51441
7.INSTALL NO. 1 ENGINE UNDER COVER
8.INSTALL FRONT WHEEL LH