1.DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
55420A
2.REMOVE INSTRUMENT CLUSTER FINISH PANEL CENTER ASSEMBLY
55414A
3.REMOVE INSTRUMENT CLUSTER FINISH PANEL END (w/o Navigation System)
4.REMOVE NAVIGATION RECEIVER ASSEMBLY WITH BRACKET (for Navigation Receiver Type)
55660
5.REMOVE NO. 2 INSTRUMENT PANEL REGISTER ASSEMBLY
55042B
6.REMOVE NO. 2 INSTRUMENT PANEL BOX DOOR SUB-ASSEMBLY
55650
7.REMOVE NO. 1 INSTRUMENT PANEL REGISTER ASSEMBLY
55041B
8.REMOVE NO. 1 INSTRUMENT PANEL BOX DOOR SUB-ASSEMBLY
55474B
9.REMOVE INSTRUMENT CLUSTER FINISH PANEL GARNISH
89611
10.REMOVE ENGINE SWITCH
Disconnect the switch connector.
Detach the 2 claws and remove the switch.