Home › Drivetrain › U660E (AUTOMATIC TRANSMISSION / TRANSAXLE) › ATF TEMPERATURE SENSOR
RM24M0E _52 Drivetrain _059579 U660E AUTOMATIC TRANSMISSION / TRANSAXLE _0292113 ATF TEMPERATURE SENSOR A

U660E AUTOMATIC TRANSMISSION / TRANSAXLE  ATF TEMPERATURE SENSOR  INSTALLATION  


PROCEDURE

Hide 1.INSTALL ATF TEMPERATURE SENSOR ASSEMBLY

a.
C138520E01
2.389,0.222 2.869,0.391 0.480,0.169 10 O-Ring 2.367,0.319 2.212,0.319 2.212,0.319 2.073,0.525 false

Coat a new O-ring with ATF and install it to the ATF temperature sensor assembly.


b.

Coat the 4 bolts with ATF.


c.
C139240E31
0.385,0.229 1.073,0.563 0.688,0.333 10 true Connector 1.635,1.094 1.75,1.281 0.115,0.188 10 true A 1.74,0.479 1.885,0.625 0.146,0.146 10 true B 2.281,0.583 2.427,0.729 0.146,0.146 10 true B 2.729,0.677 2.875,0.823 0.146,0.146 10 true B

Install the ATF temperature sensor assembly and clamp to the valve body with the 4 bolts.

Torque:
11 N*m (112 kgf*cm, 8 ft.*lbf)

Bolt length:
Bolt A:

25 mm (0.98 in.)

Bolt B:

85 mm (3.35 in.)



d.

Connect the connector.


Hide 35106D 3.INSTALL AUTOMATIC TRANSAXLE OIL PAN SUB-ASSEMBLY

Hide 30500 4.INSTALL AUTOMATIC TRANSAXLE ASSEMBLY