When the TCM is replaced, the existing transaxle compensation codes must be input into the new TCM (See page Drivetrain>U660E (AUTOMATIC TRANSMISSION / TRANSAXLE)>AUTOMATIC TRANSAXLE SYSTEM>REGISTRATION).
53292A
1.REMOVE RADIATOR SUPPORT SEAL UPPER
28800
2.REMOVE BATTERY
74431
3.REMOVE BATTERY TRAY
17751
4.REMOVE NO. 1 AIR CLEANER INLET
17752
5.REMOVE NO. 2 AIR CLEANER INLET
74411
6.REMOVE BATTERY CARRIER
74414D
7.REMOVE BATTERY CARRIER SUPPORT
89530C
8.REMOVE TCM
Turn the lock lever and disconnect the connector from the TCM.
Remove the 2 bolts and TCM from the transaxle.