1.REMOVE REAR WHEEL
47750A
2.REMOVE REAR DISC BRAKE CALIPER ASSEMBLY LH
42431
3.REMOVE REAR DISC
4.CHECK BEARING BACKLASH AND AXLE HUB DEVIATION
Using a dial indicator, measure the backlash near the center of the axle hub.
0.05 mm (0.0020 in.)
If the backlash is greater than the maximum, replace the axle hub.
Using a dial indicator, measure the deviation on the surface of the axle hub outside the hub bolts.
0.08 mm (0.0031 in.)
If the deviation is greater than the maximum, replace the axle hub.