1.DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
2.REMOVE FRONT SEAT ASSEMBLY RH
for Manual Seat:
Remove the front seat assembly RH (see page Vehicle Interior>SEAT>FRONT SEAT ASSEMBLY(for Manual Seat)>REMOVAL).
for Power Seat:
Remove the front seat assembly RH (see page Vehicle Interior>SEAT>FRONT SEAT ASSEMBLY(for Power Seat)>REMOVAL).
89183A
3.REMOVE YAW RATE SENSOR
Disconnect the yaw rate sensor connector.
Remove the 2 bolts and yaw rate sensor.