Home › Brake › BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS › VEHICLE STABILITY CONTROL SYSTEM › 2014.09–2016.05
RM24M0E _54 Brake _059583 BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS _0292158 VEHICLE STABILITY CONTROL SYSTEM C

BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS  VEHICLE STABILITY CONTROL SYSTEM  C1201  Engine Control System Malfunction  


DESCRIPTION

If a malfunction in the SFI system is detected, the operation of VSC and TRC is prohibited by the fail-safe function. When the signals from the engine are received normally, fail-safe control is canceled.

DTC No. Detection Item DTC Detection Condition Trouble Area
C1201 Engine Control System Malfunction Engine control system malfunction signal continues for 2.5 seconds. SFI system

PROCEDURE

1.CHECK SFI SYSTEM
a.

Check if SFI system DTCs are output (See page Engine / Hybrid System>2AZ-FE ENGINE CONTROL>SFI SYSTEM>DTC CHECK / CLEAR for 2AZ FE, Engine / Hybrid System>2GR-FE ENGINE CONTROL>SFI SYSTEM>DTC CHECK / CLEAR for 2GR-FE).

Result:
Result Proceed to
DTCs are not output (for 2AZ-FE). A
DTCs are not output (for 2GR-FE). B
DTCs are output (for 2AZ-FE). C
DTCs are output (for 2GR-FE). D


NOTICE:

If troubleshooting has been carried out according to Problem Symptoms Table, refer back to the table and proceed to the next step before replacing parts (See page Brake>BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS>VEHICLE STABILITY CONTROL SYSTEM>PROBLEM SYMPTOMS TABLE).




A

B

C

D