1. PRECAUTION
After turning the engine switch off, waiting time may be required before disconnecting the cable from the negative (-) battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) battery terminal notices before proceeding with work (See page General>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION).
2.REMOVE FRONT SEAT ASSEMBLY RH
for Manual Seat: (See page Vehicle Interior>SEAT>FRONT SEAT ASSEMBLY(for Manual Seat)>REMOVAL)
for Power Seat: (See page Vehicle Interior>SEAT>FRONT SEAT ASSEMBLY(for Power Seat)>REMOVAL)
89441A
3.REMOVE DECELERATION SENSOR
Disconnect the connector from the deceleration sensor.
Remove the 2 bolts and deceleration sensor.