88625Q
1.INSTALL ROOM TEMPERATURE SENSOR
Attach the claws to install the sensor.
Connect the connector.
Connect the duct.
55312
2.INSTALL LOWER INSTRUMENT PANEL
Install the lower instrument panel (See page Vehicle Interior>INTERIOR PANEL>LOWER INSTRUMENT PANEL>INSTALLATION).
3.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
4.PERFORM INITIALIZATION
Perform initialization (See page General>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION).
Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.
5.CHECK SRS WARNING LIGHT
Check the SRS warning light (See page Vehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>AIRBAG SYSTEM>DIAGNOSIS SYSTEM).