1.RECOVER REFRIGERANT FROM REFRIGERATION SYSTEM
2.DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
3.REMOVE FRONT BUMPER ASSEMBLY (for Standard)
4.REMOVE FRONT BUMPER ASSEMBLY (for Sport Package)
81175
5.REMOVE HEADLIGHT ASSEMBLY LH
81135
6.REMOVE HEADLIGHT ASSEMBLY RH
Use the same procedure as for the LH side.
88711
7.DISCONNECT NO. 1 COOLER REFRIGERANT DISCHARGE HOSE
Remove the bolt and disconnect the cooler refrigerant discharge hose from the cooler condenser.
Remove the O-ring from the cooler refrigerant discharge hose.
Seal the openings of the disconnected parts using vinyl tape to prevent moisture and foreign matter from entering them.
88716A
8.DISCONNECT COOLER REFRIGERANT LIQUID PIPE
Remove the bolt and disconnect the cooler refrigerant liquid pipe from the cooler condenser.
Remove the O-ring from the cooler refrigerant liquid pipe.
Seal the openings of the disconnected parts using vinyl tape to prevent moisture and foreign matter from entering them.
16533
9.REMOVE RADIATOR SUPPORT UPPER BRACKET
Remove the 4 bolts and 2 brackets.
16712
10.REMOVE NO. 2 FAN SHROUD
Remove the 2 bolts and fan shroud.
88460
11.REMOVE COOLER CONDENSER ASSEMBLY
Remove the cooler condenser.
88474
12.REMOVE COOLER DRYER
Using a 14 mm socket hexagon wrench, remove the cap from the modulator.
Remove the O-ring from the cap.
Using pliers, remove the cooler dryer.