This DTC is output when the ID code box does not respond to a verification request signal from the ECM.
| DTC No. | DTC Detection Condition | Trouble Area |
|---|---|---|
| B2791 | One of following conditions is met:
·
Communication failure between ID code box and ECM ·
Communication line malfunction ·
ID code verification failure |
·
Wire harness ·
Certification ECU ·
Main body ECU ·
ID code box ·
Steering lock actuator (steering lock ECU) ·
ECM |
Clear the DTC (see page Vehicle Interior>ENGINE IMMOBILISER>ENGINE IMMOBILISER SYSTEM>DTC CHECK / CLEAR).
Recheck for the DTC.
B2791 and other DTC output do not reoccur.
NG
OK