89341K
1.INSTALL FRONT CORNER ULTRASONIC SENSOR
Use the same procedure for the RH side and LH side.
Engage the 4 claws to install the front corner ultrasonic sensor as shown in the illustration.
| *a | Keyhole | - | - |
Do not damage the front bumper assembly.
Do not damage the front corner ultrasonic sensor.
Align the keyhole and the connector of the front corner ultrasonic sensor as shown in the illustration.
When pressing the front corner ultrasonic sensor to engage the claws, apply force perpendicular to the front bumper assembly.
While pressing the front corner ultrasonic sensor from the outside of the front bumper assembly, connect the connector.
After connecting the connector, press the front corner ultrasonic sensor from the outside of the front bumper assembly.
2.INSTALL FRONT BUMPER ASSEMBLY (for Standard)
3.INSTALL FRONT BUMPER ASSEMBLY (for Sport Package)