1.REMOVE FRONT BUMPER ASSEMBLY (for Standard)
2.REMOVE FRONT BUMPER ASSEMBLY (for Sport Package)
89341A
3.REMOVE NO. 1 ULTRASONIC SENSOR (for Standard)
for Type A:
Use the same procedure for the RH side and LH side.
Disconnect the connector.
Disengage the 2 claws to remove the No. 1 ultrasonic sensor.
for Type B:
Disconnect the connector.
| *A | for LH Side |
| *B | for RH Side |
Disengage the 4 claws and remove the No. 1 ultrasonic sensor as shown in the illustration.
89348A
4.REMOVE NO. 2 ULTRASONIC SENSOR RETAINER (for Standard)
Use the same procedure for the RH side and LH side.
for Type A:
Disengage the 2 claws to remove the No. 2 ultrasonic sensor retainer from the front bumper assembly.
89348D
5.REMOVE ULTRASONIC SENSOR CLIP (for Sport Package)
Disconnect the connector.
| *A | LH Side |
| *B | RH Side |
Disengage the clamp.
Disengage the 4 claws to remove the ultrasonic sensor clip.
| *A | for LH Side |
| *B | for RH Side |
89341A
6.REMOVE NO. 1 ULTRASONIC SENSOR (for Sport Package)
Disengage the 2 claws to remove the No. 1 ultrasonic sensor.
| *A | for LH Side |
| *B | for RH Side |
89348
7.REMOVE NO. 1 ULTRASONIC SENSOR RETAINER (for Sport Package)
Disengage the 2 claws to remove the No. 1 ultrasonic sensor retainer from the front bumper assembly.
| *A | for LH Side |
| *B | for RH Side |