2011-2016 FJ Cruiser · Service Manual DRIVE LINE

REMOVAL

Removal / installation · Vehicles built from Aug 2009

Versions by build date: Jul 2007 – Jul 2009 from Aug 2009


1. REMOVE REAR AXLE SHAFT LH
  1. Remove the rear axle shaft LH (Click here).


2. REMOVE REAR AXLE SHAFT RH

HINT:
Use the same procedure as for the RH side.


3. REMOVE REAR PROPELLER SHAFT ASSEMBLY
  1. Remove the rear propeller shaft assembly (Click here).


4. REMOVE REAR DIFFERENTIAL CARRIER ASSEMBLY

C217293
  1. Remove the 10 nuts and the differential carrier.

    NOTICE:
    Be careful not to damage the contact surface.


5. REMOVE REAR DIFFERENTIAL CARRIER GASKET
← REMOVAL (Jul 2007 – Jul 2009)DISASSEMBLY (Jul 2007 – Jul 2009) →