Circuit diagnosis · Vehicles built Jul 2007 – Oct 2010
Versions by build date: Jul 2007 – Oct 2010from Nov 2010
CAUTION / NOTICE / HINT
HINT:
This procedure applies only for vehicles without rear fog lights.
DESCRIPTION
An ultrasonic sensor consists of a sensor portion that transmits and receives ultrasonic waves and a pre-amplifier that amplifies them. The ultrasonic sensor outputs the ultrasonic waves and sends the received signals to the clearance warning ECU.
WIRING DIAGRAM
INSPECTION PROCEDURE
1. INSPECT NO. 1 ULTRASONIC SENSOR RH
Remove the No. 1 ultrasonic sensor RH.
Measure the resistance according to the value(s) in the table below.