2011-2016 FJ Cruiser · Service Manual CRUISE CONTROL SYSTEM

P0607 Input Signal Circuit Malfunction

Diagnostic trouble codes · Vehicles built Jul 2007 – Jul 2009

DESCRIPTION

This DTC indicates the internal abnormalities of the ECM.
DTC No.
DTC Detection condition
Trouble Area
P0607
The ECM has a supervisory CPU and a control ECU inside.
  1. When each input STP signal is different for 0.15 seconds or more, this trouble code is output.
  1. This trouble code is output after 0.4 seconds has passed from the time the cruise cancel input signal (STP input) is input into the ECM.
ECM

HINT:
When a trouble code is detected, fail-safe continues until the ignition switch is turned off.


INSPECTION PROCEDURE


1. REPLACE ECM
  1. Replace ECM (Click here).


NEXT

END


← P0575 Cruise Control Input Circuit (from Aug 2009)Clutch Switch Circuit (Jul 2007 – Jul 2009) →