2011-2016 FJ Cruiser · Service Manual CRUISE CONTROL SYSTEM

P0575 Cruise Control Input Circuit

Diagnostic trouble codes · Vehicles built from Aug 2009

DESCRIPTION

This DTC indicates the internal abnormalities of the ECM.
DTC No.
DTC Detection condition
Trouble Area
P0607
When either of the following condition is met:
  1. STP signal input to the ECM supervisory CPU and control ECU are different for 0.15 seconds or more
  1. 0.4 seconds have passed after cruise cancel input signal (STP input) is input to the ECM.
ECM

HINT:
The ECM receives signal from each sensor to control all functions of the cruise control system. When a trouble code is detected, fail-safe function activates and remains on until the ignition switch is turned off.


INSPECTION PROCEDURE


1. REPLACE ECM
  1. Clear the DTCs (Click here).

  1. Recheck for DTCs (Click here).

    OK:
    DTC P0575 is not output.



NG
REPLACE ECM
OK

USE SIMULATION METHOD TO CHECK (Click here)


← P0571 Stop Light Switch Circuit Malfunction (from Nov 2010)P0607 Input Signal Circuit Malfunction (Jul 2007 – Jul 2009) →