2011-2016 FJ Cruiser · Service Manual BODY ELECTRICAL

Entire Combination Meter does not Operate

Circuit diagnosis · Vehicles built from Nov 2010

Versions by build date: Jul 2007 – Oct 2010 from Nov 2010

DESCRIPTION

This circuit provides power to the combination meter assembly.

WIRING DIAGRAM

E126859E02

INSPECTION PROCEDURE


1. CHECK FUSES (DOME, GAUGE)

  1. E126883E01
    Remove the DOME fuse from engine room relay block No. 2.

  1. Remove the GAUGE fuse from the main body ECU.

  1. Measure the resistance.

    Standard Resistance:
    Below 1Ω

  1. Reinstall the fuse.



NG
REPLACE FUSE
OK


2. INSPECT COMBINATION METER ASSEMBLY
E126858E01
  1. Disconnect the E13 combination meter connector.

  1. Measure the resistance.

    Standard resistance:
    Terminal No.
    Condition
    Specified Condition
    E13-21 (ES) - Body ground
    Always
    Below 1 Ω

  1. Measure the voltage.

    Standard voltage:
    Terminal No.
    Condition
    Specified Condition
    E13-2 (IG+) - Body ground
    Ignition switch ON
    11 to 14V
    E13-1 (B) - Body ground
    Always
    11 to 14V

  1. Reconnect the combination meter connector.



NG
REPAIR OR REPLACE HARNESS AND CONNECTOR
OK

REPLACE COMBINATION METER ASSEMBLY (Click here)


← Entire Combination Meter does not Operate (Jul 2007 – Oct 2010)Speedometer Malfunction (Jul 2007 – Oct 2010) →