INSTALLATION
Removal / installation · Vehicles built Nov 2010 – Jul 2012
Versions by build date: Jul 2007 – Oct 2010 Nov 2010 – Jul 2012 Aug 2012 – Oct 2012 from Nov 2012
| 1.
INSTALL REAR BUMPER BAR BRACKET LH |
 |
- Install the rear bumper bar bracket with the 2 bolts.
-
Torque:
- 31 N*m{
316 kgf*cm
, 23 ft.*lbf
}
| 2.
INSTALL REAR BUMPER BAR BRACKET RH |
 |
- HINT:
- Use the same procedure as for the LH side.
| 3.
INSTALL REAR BUMPER SIDE SUPPORT SUB-ASSEMBLY LH |
 |
- Align the locating pin with the hole and install the rear bumper side support with the 2 bolts.
-
Torque:
- 8.0 N*m{
82 kgf*cm
, 71 in.*lbf
}
| 4.
INSTALL REAR BUMPER SIDE SUPPORT SUB-ASSEMBLY RH |
 |
- HINT:
- Use the same procedure as for the LH side.
| 5.
INSTALL REAR BUMPER SIDE STAY LH |
 |
- Insert the hook into the body hole and install the rear bumper side stay with the bolt.
-
Torque:
- 8.0 N*m{
82 kgf*cm
, 71 in.*lbf
}
| 6.
INSTALL REAR BUMPER SIDE STAY RH |
 |
- HINT:
- Use the same procedure as for the LH side.
| 7.
INSTALL REAR BUMPER ENERGY ABSORBER |
 |
- Install the rear bumper energy absorber.
| 8.
INSTALL REAR BUMPER UPPER RETAINER LH |
 |
- Engage the 3 claws and install the rear bumper upper retainer.
Tighten the 2 screws.
-
Torque:
- 3.0 N*m{
31 kgf*cm
, 27 in.*lbf
}
| 9.
INSTALL REAR BUMPER UPPER RETAINER RH |
 |
- HINT:
- Use the same procedure as for the LH side.
| 10.
INSTALL REAR BUMPER END RETAINER LH |
 |
- Engage the 2 claws and install the rear bumper end retainer.
Tighten the screw.
-
Torque:
- 3.0 N*m{
31 kgf*cm
, 27 in.*lbf
}
| 11.
INSTALL REAR BUMPER END RETAINER RH |
 |
- HINT:
- Use the same procedure as for the LH side.
| 12.
INSTALL REAR BUMPER COVER |
 |
- Engage the 6 claws and the 2 clips and install the rear bumper cover.
- Engage the harness clamp, and connect the connector.
- Tighten the 7 bolts and the 2 screws.
-
Torque:
- 8.0 N*m{
82 kgf*cm
, 71 in.*lbf
}
for bolt
- 3.0 N*m{
31 kgf*cm
, 27 in.*lbf
}
for screw
- Install the clip.
- HINT:
- Use the same procedure for the RH side and LH side.
- Remove the protective tape.