2011-2016 FJ Cruiser · Service Manual ENGINE

REMOVAL

Removal / installation · Vehicles built from Nov 2010

Versions by build date: Jul 2007 – Jul 2009 Aug 2009 – Oct 2010 from Nov 2010


1. REMOVE V-BANK COVER

  1. A221454E02
    Raise the front of the V-bank cover to disengage the 2 pins.

  1. Remove the 2 V-bank cover hooks from the bracket.

  1. Remove the V-bank cover.

    Text in Illustration 
    *1
    Pin
    *2
    Hook


2. REMOVE NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY
  1. Remove the 4 bolts.

  1. A224743E01
    Unhook the engine under cover from the frame as shown in the illustration.
    Text in Illustration 
    *a
    Hook
    *b
    Frame


3. REMOVE UPPER RADIATOR SUPPORT SEAL

  1. A226630
    Disengage the 7 clips, then remove the radiator support seal.


4. REMOVE FAN SHROUD

  1. A226631
    Disconnect the reservoir hose from the radiator.

  1. A226632
    Loosen the 4 nuts holding the fluid coupling fan.

  1. Remove the fan and V-ribbed belt (Click here).

  1. A226634
    Disengage the claw to open the hose clamp and disconnect the oil cooler tube from the fan shroud.

  1. Remove the bolt from the reserve tank.

  1. Remove the 2 bolts from the fan shroud.

  1. Disengage the claws of the shroud from the radiator as shown in the illustration.

  1. Remove the 4 nuts of the fluid coupling fan, and then remove the shroud together with the coupling fan.

    NOTICE:
    Be careful not to damage the radiator core.

  1. Remove the fan pulley from the water pump.


5. REMOVE FAN

A112113
  1. Remove the 4 nuts and the fan from the fluid coupling.

← REMOVAL (Aug 2009 – Oct 2010)INSPECTION (from Jul 2007) →