DTC B1625/22 Side Airbag Sensor LH Circuit Malfunction |
DTC B1627/82 Lost communication with Side Airbag Sensor LH |
| DTC No. | DTC Detection Condition | Trouble Area |
| B1625/22 B1627/82 |
|
|
| 1.CHECK SIDE AIRBAG SENSOR ASSEMBLY LH |
![]() |
Turn the ignition switch off.
Disconnect the cable from the negative (-) battery terminal.
Interchange the side airbag sensor assembly LH with RH and connect the connectors.
Connect the cable to the negative (-) battery terminal.
Clear the DTCs stored in memory (Click here).
Turn the ignition switch off.
Turn the ignition switch to ON, and wait for at least 60 seconds.
Check for DTCs (Click here).
| Result | Proceed to |
| DTC B1625/81 or B1627/22 output. | A |
| DTC B1620/21 or B1622/81 output. | B |
| DTCs B1620/21, B1622/81, B1625/22 and B1627/82 are not output. | C |
Turn the ignition switch off.
Disconnect the cable from the negative (-) battery terminal.
Return the side airbag sensor assembly LH and RH to their original positions and connect the connectors.
| *1 | Side Airbag Sensor Assembly RH |
| *2 | Center Airbag Sensor Assembly |
|
| ||||
|
| ||||
| A | ||
| ||