Home › RESTRAINTS › SEAT BELT › SEAT BELT WARNING SYSTEM

SEAT BELT WARNING SYSTEM > PROBLEM SYMPTOMS TABLE

for Preparation Click here



Seat Belt Warning System: 
Symptom
Suspected area
See page
Driver seat belt warning light does not blink, or it does not go off after the seat belt is fastened when the ignition switch is on.
1. Troubleshooting
Click here
2. Combination meter assembly
Click here
3. Front seat inner belt (Driver side)
Click here
4. Wire harness
-
Passenger seat belt warning light does not blink with the front passenger's seat occupied, or it does not go off after the seat belt is fastened when the ignition switch is on.
1. Troubleshooting
Click here
2. Occupant detection sensor
Click here
3. Clearance warning indicator
Click here
4. Front seat inner belt (Front passenger side)
Click here
5. Wire harness
-