2014-2019 Hiace · Service Manual BRAKE

C1440 Unusual Bank Angle Detected

Diagnostic trouble codes · Vehicles built from Dec 2017

Versions by build date: Jan 2015 – Mar 2016 Apr 2016 – Dec 2016 Jan 2017 – Nov 2017 from Dec 2017

DESCRIPTION

If the skid control ECU (brake actuator assembly) determines that the vehicle is being driven at a steep bank angle, the skid control ECU (brake actuator assembly) stores DTC C1440 while VSC operation is temporarily disabled.
This is not a malfunction if the system and sensor circuits are normal and normal VSC operation resumes.
DTC No.
DTC Detection Condition
Trouble Area
C1440
Driving at a steep bank angle
Yaw rate and acceleration sensor (Airbag sensor assembly)

INSPECTION PROCEDURE


1. CHECK DTC
  1. Clear the DTCs (Click here).

  1. Turn the ignition switch off.

  1. Start the engine.

  1. Perform a road test.

  1. Check if the same DTC is recorded (Click here).

    Result:
    Result
    Proceed to
    DTC C1440 is output
    A
    DTC C1440 is not output
    B
    Yaw rate and acceleration sensor DTC is output
    C



B
END

C
REPAIR CIRCUITS INDICATED BY OUTPUT DTCS (Click here)
A


2. CLEAR DTC
  1. Clear the DTCs (Click here).

    HINT:
    1. If the skid control ECU (brake actuator assembly) determines that the vehicle is being driven at a steep bank angle, the skid control ECU (brake actuator assembly) stores DTC C1440 while VSC operation is temporarily disabled.
    2. It is not a malfunction if the system and sensor circuits are normal and if the normal VSC operation resumes, which automatically clears DTC C1440, after the vehicle is returned to a normal position.


NEXT

END


← C1440 Unusual Bank Angle Detected (Jan 2017 – Nov 2017)C1442 Invalid Data Received from Deceleration Sensor (+ C1443) (Jan 2015 – Mar 2016) →