PROBLEM SYMPTOMS TABLE
Troubleshooting · Vehicles built from Dec 2017
Versions by build date: Oct 2014 – Dec 2014 Jan 2015 – Nov 2015 Dec 2015 – Mar 2016 Apr 2016 – Dec 2016 Jan 2017 – Nov 2017 from Dec 2017
- HINT:
- Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in order of probability in the "Suspected Area" column of the table. Check each symptom by checking the suspected areas in the order they are listed. Replace parts as necessary.
- Inspect the fuses and relays related to this system before inspecting the suspected areas below.
- If the problem only occurs in certain locations or at certain times of day, check for wave interference.
- If the vehicle components are added, check for wave interference from the added components.
- Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in order of probability in the "Suspected Area" column of the table. Check each symptom by checking the suspected areas in the order they are listed. Replace parts as necessary.
| Symptom |
Suspected Area |
See page |
| Security indicator light does not blink |
Proceed to "Security Indicator Light Does not Blink" |
Click here
|
| Engine cannot be started*1 |
ID code box (immobiliser code ECU) |
- |
| ECM |
- |
|
| ECD system |
- |
|
| Power source mode cannot be changed*1 |
Engine switch |
Click here
|
| Certification ECU (smart key ECU assembly) |
- |
|
| Steering lock lock/unlock not possible*2 |
Steering lock ECU (steering lock actuator assembly) |
Click here
|
| Immobiliser system does not operate properly |
Proceed to "Immobiliser System does not Operate Properly" |
Click here
|
- *1: Refer to Problem Symptoms Table for Smart Entry and Start System (for Start Function) (Click here).
- *2: Refer to Problem Symptoms Table for Steering Lock System (Click here).