REMOVAL
Removal / installation · Vehicles built from Oct 2014
| 1. REMOVE PROPELLER SHAFT ASSEMBLY |
- HINT:
- Propeller shaft assembly for Super Long Wheelbase (Click here)
- Propeller shaft assembly for Long Wheelbase (Click here)
- Propeller shaft assembly for Super Long Wheelbase (Click here)
| 2. DISCONNECT FUEL TANK WIRE |
Disconnect the fuel tank wire.

| 3. DISCONNECT TANK RETURN TUBE SUB-ASSEMBLY |
Disconnect the fuel tank return tube sub-assembly. (Click here)

| 4. DISCONNECT TANK MAIN TUBE SUB-ASSEMBLY |
Disconnect the fuel tank main tube sub-assembly.

| 5. DISCONNECT FUEL TANK BREATHER TUBE |
Disconnect the clip and fuel tank breather tube.

| 6. REMOVE FUEL HOSE PROTECTOR |
Detach the 2 claws to remove the fuel hose protector from the fuel tank to filler pipe hose.

| 7. DISCONNECT FUEL HOSE NO.3 |
Loosen the clamp bolt, and disconnect the fuel hose No.3.

| 8. REMOVE FUEL TANK ASSEMBLY |
Remove the bolt, and disconnect the parking brake cable No.3.
Support the fuel tank, with the transmission jack.
Remove the 6 bolts, 2 fuel tank bands and fuel tank assembly.

| 9. REMOVE FUEL SENDER GAUGE ASSEMBLY |
Remove the fuel tank wire, fuel evaporation No.1 tub sub-assembly, fuel tank main tube sub- assembly and fuel tank return tube sub-assembly from the fuel sender gauge assembly.
Remove the fuel evaporation No.1 tube sub-assembly, fuel tank main tube sub- assembly and fuel tank return tube sub-assembly from the fuel hose grommet.
Remove the fuel hose grommet from the fuel tank assembly.
Remove the 8 bolts, fuel pump gauge retainer, fuel suction tube set gasket and fuel sender gauge assembly.
