2014-2019 Hiace · Service Manual ENGINE

REMOVAL

Removal / installation · Vehicles built from Oct 2014


1. REMOVE PROPELLER SHAFT ASSEMBLY

HINT:
  1. Propeller shaft assembly for Super Long Wheelbase (Click here).
  2. Propeller shaft assembly for Long Wheelbase (Click here).


2. DISCONNECT FUEL TANK WIRE

  1. A114058
    Disconnect the fuel tank wire.


3. DISCONNECT FUEL TANK RETURN TUBE SUB-ASSEMBLY

  1. A114059E01
    Disconnect the fuel tank return tube sub-assembly (Click here).


4. DISCONNECT FUEL TANK MAIN TUBE SUB-ASSEMBLY
  1. Disconnect the fuel tank main tube sub-assembly.


5. DISCONNECT FUEL TANK BREATHER TUBE

  1. A102474E01
    Disconnect the clip and fuel tank breather tube.


6. REMOVE FUEL HOSE PROTECTOR

  1. A309405
    Detach the 2 claws to remove the fuel hose protector from the fuel tank to filler pipe hose.


7. DISCONNECT FUEL HOSE NO.3

  1. A102472E01
    Loosen the clamp bolt, and disconnect the fuel hose No.3.


8. REMOVE FUEL TANK ASSEMBLY
  1. Remove the bolt, and disconnect the parking brake cable No.3.

  1. Support the fuel tank with the transmission jack.

  1. A102475E01
    Remove the 6 bolts, 2 fuel tank band sub-assemblies and fuel tank assembly.


9. REMOVE FUEL SENDER GAUGE ASSEMBLY
  1. Remove the fuel tank wire, fuel evaporation No.1 tube sub-assembly, fuel tank main tube sub-assembly and fuel tank return tube sub-assembly from the fuel sender gauge assembly.

  1. Remove the fuel evaporation No.1 tube sub-assembly, fuel tank main tube sub-assembly and fuel tank return tube sub-assembly from the fuel hose grommet.

  1. Remove the fuel hose grommet from the fuel tank assembly.

  1. Remove the 8 bolts, fuel pump gauge retainer, fuel suction tube set gasket and fuel sender gauge assembly.

← COMPONENTS (from Oct 2014)INSTALLATION (from Oct 2014) →