REMOVAL
Removal / installation · Vehicles built from Oct 2014
| 1. REMOVE PROPELLER SHAFT ASSEMBLY |
- HINT:
- Propeller shaft assembly for Super Long Wheelbase (Click here)
- Propeller shaft assembly for Long Wheelbase (Click here)
- Propeller shaft assembly for Super Long Wheelbase (Click here)
| 2. DISCONNECT FUEL TANK WIRE |
Disconnect the fuel tank wire.

| 3. DISCONNECT FUEL TANK RETURN TUBE |
Disconnect the fuel tank return tube (Click here).

| 4. DISCONNECT FUEL TANK MAIN TUBE SUB-ASSEMBLY |
Disconnect the fuel tank main tube sub-assembly.

| 5. DISCONNECT FUEL TANK BREATHER TUBE |
Disconnect the clip and fuel tank breather tube.

| 6. REMOVE FUEL HOSE PROTECTOR |
Detach the 2 claws to remove the fuel hose protector from the fuel tank to filler pipe hose.

| 7. DISCONNECT NO. 3 FUEL HOSE |
Loosen the clamp bolt and disconnect the No. 3 fuel hose.

| 8. REMOVE FUEL TANK ASSEMBLY |
Remove the bolt and disconnect the No. 3 parking brake cable.
Support the fuel tank with a transmission jack.
Remove the 6 bolts, 2 fuel tank bands and fuel tank assembly.

| 9. REMOVE FUEL SENDER GAUGE ASSEMBLY |
Remove the fuel tank wire, No. 1 fuel evaporation tube sub-assembly, fuel tank main tube sub- assembly and fuel tank return tube sub-assembly from the fuel sender gauge assembly.
Remove the No. 1 fuel evaporation tube sub-assembly, fuel tank main tube sub- assembly and fuel tank return tube sub-assembly from the fuel hose grommet.
Remove the fuel hose grommet from the fuel tank assembly.
Remove the 8 bolts, fuel pump gauge retainer, fuel suction tube set gasket and fuel sender gauge assembly.
