2014-2019 Hiace · Service Manual ENGINE

REMOVAL

Removal / installation · Vehicles built from Oct 2014


1. REMOVE FRONT BUMPER COVER
  1. for Standard Body (Click here)
  2. for Wide Body (Click here)

2. REMOVE INTAKE MASS AIR FLOW METER SUB-ASSEMBLY

  1. for Round Type:

    1. A106857
      Remove the 2 bolts.

    2. Loosen the clip, and remove the air cleaner inlet sub-assembly.

    3. A110722
      Disconnect the mass air flow meter connector.

    4. Remove the 2 screws and the mass air flow meter.

  1. for Angular Type:

    1. Remove the headlight assembly RH (Click here).

    2. A239561
      Remove the bolt and No. 1 air cleaner inlet.

    3. A231926
      Loosen the hose clamp.

    4. Disconnect the air cleaner hose.

    5. A238236
      Remove the 3 bolts and air cleaner with hose.

    6. A238237
      Detach the clamp and disconnect the connector from the air cleaner.

    7. Remove the 2 screws and intake mass air flow meter.

← ON-VEHICLE INSPECTION (from Oct 2014)INSPECTION (from Oct 2014) →